Kyocera FS-2100DN Management Guide

4-24. Security > IPSec > Rule (1-3)
The rules to use can be selected or edited.
4-25. Security > IPsec > Certificate
The detailed information of the certificate can be seen.
4-26 Securit
y
> MAC Address Filterin
g
Lifetime (Time) Specifies the lifetime of an ISAKMP SA in seconds.
Item Description
Rule Enable (on) or disable (off) the selected IPSec policy.
Protocols
Select the protocol from the following choices.
— ESP
— AH
Encryption Select the encryption algorithm from the following choices. (Only when ESP is selected for
Protocols.)
— 3DES
— AES
Hash Select the hash algorithm from the following choices.
— MD5
— SHA-1
PFS Select the PFS to use from the following choices.
— NONE
— modp768(1)
— modp-1024(2)
— modp-1536(5)
— modp-2048(14)
— modp-4096(16)
— modp-6144(17)
Lifetime (Time) Specifies the lifetime of an ISAKMP SA in seconds.
IP Version Select the IP version of the device to be connected from the following choices.
— IPv4
— IPv6
IP Address (IPv4) Specify the IPv4 address of the host or network to be connected in IPSec.
Subnet Mask Prefix Length Specify the subnet mask of the host or network to be connected in IPSec.
IP Address (IPv6) Specify the IPv6 address of the host or network to be connected in IPSec.
Prefix Length Specify the prefix length for IPv6.
Item Description
Root Certificate Shows the detailed information of Root Certificate.
CA-issued Device Certification Shows the detailed information of CA-issued Device Certificate.
Page 20 of 2
2
Using a Web Browser to Manage the I
B
-51
10
/
2
/
201
2
file:///C:/Tom/PDF/I
B
-51/I
B
-51%20Setu
p
%20Guide%20HTML%20En
g
lish/card
_
home
pa
...

Kyocera FS-2100DN Specifications

General

Category	All in One Printer
Technology	Laser
Maximum Resolution	1200 x 1200 DPI
Duplex Printing	Yes
Print Margins	4 mm
Standard Printer Languages	PCL6
Maximum Print Size	A4
Interface	USB 2.0, Ethernet
Warm-up Time	15 s