Kyocera FS-2100DN Management Guide

4-2. Protocols > TCP/IP > IP Filters (IPv4)
IP Filters(IPv4) can be used to specify the host or network that can use IB-51. Up to 10 access list entries can be specified.
Item Description
General Settings
Host Name For designating the name of IB-51.
IPv4 Settings DHCP Enable (On) or disable (Off) the auto IP address configuration
using DHCP.
Auto-IP Enable (On) or disable (Off) the IP address assignment using
Auto-IP.
IP Address
For assigning the IB-51's IP address. Example: 192.168.110.171
Subnet Mask
For designating the subnet mask.
Default Gateway
For designating the IP address of the default gateway.
Domain Name For designating the DNS name of the domain to which the IB-51
belongs. Do not designate the host name.
DNS Server (Primary,
Secondary)
For designating the primary and secondary IP addresses of the
DNS (Domain Name System) server. To obtain an IP address
from the DHCP server, Use DNS Server from DHCP must be
selected.
WINS Server (Primary,
Secondary)
For designating the primary and secondary IP addresses of the
WINS server. To obtain an IP address from the DHCP server,
Use WINS Server from DHCP must be selected.
Scope ID For determining the scope of IP addresses the Windows server
can assign or lease.
Bonjour
Bonjour can be switched on and off. Activate Bonjour if you want
to be able to add printers/MFPs through Print Center in Mac OS
X. Printers/MFPs must support KPDL for printing.
Bonjour Name
For designating a name to be used with Bonjour.
IPv6 Settings
IPv6
Switches IPv6 on and off. When this setting is on, the IB-51
supports IPv6. In order to use IPv6, however, all of the devices
on a network need to support IPv6.
IP Address
Assign the IPv6 address to IB-51.
Prefix Length
Specifies the prefix length for IPv6.
RA (Stateless) Enable (On) or disable (Off) the IPv6 address assignment using
RA.
Default Gateway For designating the IP address of the default gateway.
DHCPv6 (Stateful)
Enable (On) or disable (Off) the auto IP address configuration
using DHCPv6.
Domain Name For designating the DNS name of the domain to which the IB-51
belongs. Do not designate the host name.
DNS Server (Primary,
Secondary)
For designating the primary and secondary IP addresses of the
DNS (Domain Name System) server. To obtain an IP address
from the DHCP server, Use DNS Server from DHCP must be
selected.
Item Description
IP Address
Specify the IP address or work address to allow access from.
Page 8 of 2
2
Using a Web Browser to Manage the I
B
-51
10
/
2
/
201
2
file:///C:/Tom/PDF/I
B
-51/I
B
-51%20Setu
p
%20Guide%20HTML%20En
g
lish/card
_
home
pa
...

Kyocera FS-2100DN Specifications

General

Category	All in One Printer
Technology	Laser
Maximum Resolution	1200 x 1200 DPI
Duplex Printing	Yes
Print Margins	4 mm
Standard Printer Languages	PCL6
Maximum Print Size	A4
Interface	USB 2.0, Ethernet
Warm-up Time	15 s