6-44
Using Convenient Fax Functions > Network FAX
Setup
The following preparation is needed before using Network FAX.
Flow of Setup
Connection to a PC
Connect the machine to a PC using the network cable. For details, refer to the machine’s Operation
Guide.
Machine Registration
Using the memory transmission function, select the recipient PC or file format.
Installing Software on the PC
Install the dedicated software (included in the supplied DVD) on your PC required to use Network FAX.
For details, refer to Installing the Network Fax Driver on page 6-45.
NOTE
Use the memory transmission function to forward the received fax to the PC or forward it as
an e-mail attachment. For details, refer to Memory Forwarding on page 6-2.
To Next Page
Loading...
