1-10
Before Using the Fax Machine > Setting Date and Time
Setting Date and Time
Set the local date and time at the place of installation.
When you send a fax using the transmission function, the date and time as set here will be printed in the header of the
fax. Set the date, time and time difference from GMT of the region where the machine is used.
1
Display the screen.
2
Set the time difference.
Select the region.
3
Set the date.
Press [+] or [-] to set each of Year, Month, and Day.
NOTE
The user authentication screen appears. Enter your login user name and password, and press [Login]. Refer to
Adding a User in the machine's Operation Guide for the default login user name and password.
Be sure to set the time difference before setting the date and time.
The date and time are set using the Quick Setup Wizard when the machine is turned on for the first time after
installation.
NOTE
If you have selected an area that observes daylight savings time, the Daylight Savings Time
Setup screen will be displayed. Press [On] or [Off].
System Menu/Counter.
System Menu
10:10
System
5/5
Adjustment/Maintenance
Date/Timer
1
2
GB0054_04
Use [ ] or [ ] to scroll up and down.
System Menu/Counter.
Date/Timer - Time Zone
-12:00 International Date Line West
10:10
-11:00 Samoa
-11:00 Universal Coordinated Time-11
-10:00 Hawaii
1/24
Cancel OK
System Menu/Counter.
Date/Timer
Date/Time
10/10/2012 10:10
10:10
Date Format
DD/MM/YY
On
+09:00 Osaka, Sapporo, Tokyo
Time Zone
Auto Panel Reset
1/4
< Back
2
1
GB0610_00
GB0614_00
Use [ ] or [ ] to scroll up and down.
Date/Timer - Date/Time
10:10System Menu/Counter.
Month
Cancel
Next >
Year
Day
2
3
System Menu/Counter.
Date/Timer
Date/Time
10/10/2012 10:10
10:10
Date Format
DD/MM/YY
On
+09:00 Osaka, Sapporo, Tokyo
Time Zone
Auto Panel Reset
1/4
< Back
1
GB0610_00
GB0611_00
To Next Page
Loading...
