4-7
Sending Faxes > Fax transmission functions
Fax transmission functions
Functions frequently used for transmission are shown at the bottom of the transmission screen.
To show other functions, press [Functions]. Use [T] or [S] to select the function.
What do you want to do? Reference Page
Specify the original size. Original Size X page 4-8
Specify the correct original orientation. Original Orientation X page 4-9
Send mixed size originals. Mixed Sized Originals X page 4-9
Automatically scan 2-sided originals. 2-sided/Book Original X page 4-10
Select the size of the image being sent. Sending Size X page 4-11
Set the resolution at which to scan originals. FAX TX Resolution X page 4-12
Adjust the density. Density X page 4-13
Select original image type for best results. Original Image X page 4-13
Change the size of the image being sent. Zoom X page 4-14
Scan a large number of originals separately and then produce as one job. Continuous Scan X page 4-14
Add a file name to the job to easily check its status. File Name Entry X page 4-23
Send notice by e-mail when a job is complete. Job Finish Notice X page 4-22
Specify a time for transmission. FAX Delayed Transmission X page 4-17
Connect to the destination first and then scan the original. FAX Direct Transmission X page 4-15
Set up another transmission while communication is taking place. Standby Transmission X page 4-20
Interrupt transmission and send another original. Interrupt Send X page 4-21
Send an original using a sub address. Sub Address Transmission X page 6-23
Initiate reception of a fax by controlling the receiving machine. Polling Communication X page 6-26
Encrypt an original to send it safely. Encryption X page 6-36
To Next Page
Loading...
