9-7
Fax Settings > Default fax settings
Reception
Dialing Mode(Inch version
only)
Select the telephone line according to the type you are contracted with. Please note that
selecting a wrong telephone line will prevent you from sending fax.
Value: Tone(DTMF), Pulse(10PPS)
This item is included in the Quick Setup Wizard. Refer to Quick Setup Wizard (Fax Setup)
on page 1-7.
Retry Times The number of retry times can be changed automatically.
Value: 0 - 14
This item is included in the Quick Setup Wizard. Refer to Quick Setup Wizard (Fax Setup)
on page 1-7.
ECM TX Set whether ECM TX is performed.
ECM is a communication mode specified by the ITU-T (International Telecommunication Union)
that retransmits data when an error occurs. Fax machines that have ECM mode check for
errors as they communicate, preventing distortion of the image due to noise on the line and
other conditions.
Value: On, Off
NOTE
When there is a large amount of noise on the line, communication may take slightly
longer than when [Off] is selected.
TX Start Speed Set the TX Start Speed.
When communication conditions are bad, the fax may not be transmitted correctly. In that case,
set a lower TX Start Speed.
Value: 9600bps, 14400bps, 33600bps
NOTE
Normally this should be used with the default setting.
Item Description
Media Type Specify the paper type to be used for print output of the received fax.
Value: All Media Types, Plain, Rough, Vellum, Recycled, Bond, Color, Thick, High Quality,
Custom 1-8
Refer to Media Type for Print Output on page 5-10.
Reduce RX Size When the reception size is larger than the paper size, you can reduce the print size.
Value: On, Off
Refer to Reduced Reception on page 5-9.
Reception Date/Time Reception Date/Time function adds the reception date/time, sender information and number of
pages on the top of each page when the message is printed out. It is useful for confirming the
time of reception if the fax is from a different time zone.
Value: On, Off
For details, refer to Reception Date/Time on page 5-9.
Duplex When received multiple pages of data are the same width, they can be printed out on both
sides of paper having the same width as the data.
Value: On, Off
For details, refer to Duplex Print Output on page 5-9.
Item Description
To Next Page
Loading...
