Handling Paper 1-13
Paper Type
The printer is capable of printing under the optimum setting for the type of
paper being used.
Setting the paper type for the paper source from the printer’s operation
panel will cause the printer to automatically select the paper source and
print in the mode best suited to that type of paper.
A different paper type setting can be made for each paper source
including the MP tray. Not only can preset paper types be selected, but it
is also possible for you to define and select customized paper types.
Refer to Type Adjust (Creating custom paper type) on page 2-37. The
following types of paper can be used.
Paper Type
Paper Source
MP Tray
Paper Cassette
Optional Paper
Feeder PF-500
Paper Weight Duplex Path
Optional Paper
Feeder PF-510
PLAIN Yes Yes Normal 2 Yes Yes
TRANSPARENCY Yes No Extra Heavy No No
PREPRINTED Yes Yes Normal 2 Yes Yes
LABELS Yes No Heavy 1 No Yes
BOND Yes Yes Normal 3 Yes Yes
RECYCLED Yes Yes Normal 2 Yes Yes
VELLUM Yes No Light No No
ROUGH Yes Yes Normal 3 Yes Yes
LETTERHEAD Yes Yes Normal 2 Yes Yes
COLOR Yes Yes Normal 2 Yes Yes
PREPUNCHED Yes Yes Normal 2 Yes Yes
ENVELOPE Yes No Heavy 2 No Yes
CARDSTOCK Yes No Heavy 1 No Yes
COATED Yes No Heavy 1 Yes Yes
THICK Yes No Heavy 2 No Yes
HIGH QUALITY Yes Yes Normal 3 Yes Yes
CUSTOM 1 (to 8)
†
Yes Yes Normal 2 Yes Yes
Yes: Can be stored No: Cannot be stored
†. This is a paper type defined and registered by the user. Up to eight types of user settings may be defined. For
details, refer toType Adjust (Creating custom paper type) on page 2-37.
To Next Page
Loading...
Need help?
General