Kyocera FS C8026N - 3.2 Using the Menu Selection System

3.2 Using the Menu Selection System
3-8
3.2 Using the Menu Selection System
3.2.1 Menu Selection System
This section explains how to use the menu selection system. The MENU key on the operator
panel allows you to use the menu to set or change the printer environment such as the
number of copies to print, emulation, etc., to your specific needs. Settings can be made
when Ready is indicated on the printer message display.
The printer obeys the most recently received printer settings sent from the application
software, or from the printer driver, which take priority over operator panel settings.
Entering the mode selection menu
Press the MENU key when Ready is indicated on the printer message display.
The mode selection menu is displayed.