Kyocera FS C8026N - Internal Fonts

3.6 Making Default Settings
3-37
3
33
3
Press the Z key.
4
44
4
Press the U or V key repeatedly until >List of
Internal Fonts or >List of Option
Fonts appears.
5
55
5
Press the ENTER key. A question mark (?) appears.
6
66
6
Press the ENTER key again. Processing appears,
then Ready. The printer prints out a list of fonts with
a sample and font ID (number) for each of them.
Sample lists of fonts are shown in Figure 3-10 below.
Figure 3-10
>List of
Internal Fonts
>List of
Internal Fonts?
Internal Scalable and Bitmapped Fonts List
Font Name Scalable/Bitmap Password Selection [FSET] Font ID
PRESCRIBE
Internal Scalable and Bitmapped Fonts List
Font Name Scalable/Bitmap Password Selection [FSET] Font ID
PRESCRIBE