Kyocera FS C8026N - Linefeed (LF) Action; Carriage-Return (CR) Action

3.7 Pagination
3-39
3.7.3 Linefeed (LF) Action
This procedure instructs the printer what to do when it
receives a linefeed code (0AH).
• LF Only: Linefeed is performed (Default).
• CR and LF: A linefeed and carriage return are
performed.
• Ignore LF: The linefeed is ignored.
1
11
1
Press the MENU key.
2
22
2
Press the U or V key repeatedly until Page Set >
appears.
3
33
3
Press the Z key.
4
44
4
Press the U or V key repeatedly until >LF Action
appears.
5
55
5
Press the ENTER key. A blinking question mark (?)
appears.
6
66
6
Press the U or V key repeatedly until the desired
linefeed action appears.
7
77
7
When the desired action is displayed, press the
ENTER key.
8
88
8
Press the MENU key. The display returns to Ready.
3.7.4 Carriage-Return (CR) Action
This procedure instructs the printer what to do when it
receives a carriage-return code (0DH).
• CR Only: A carriage-return is performed (Default).
• CR and LF: A linefeed and carriage return are
performed.
• Ignore CR: The carriage-return is ignored.
1
11
1
Press the MENU key.
2
22
2
Press the U or V key repeatedly until Page Set >
appears.
3
33
3
Press the Z key.
4
44
4
Press the U or V key repeatedly until >CR Action
appears.
5
55
5
Press the ENTER key. A blinking question mark (?)
appears.
6
66
6
Press the U or V key repeatedly until the desired
carriage-return action appears.
7
77
7
When the desired action is displayed, press the
ENTER key.
8
88
8
Press the MENU key. The display returns to Ready.
Page Set >
>LF Action
LF only
>LF Action
? LF only
Page Set >
>CR Action
CR only
>CR Action
? CR only