Kyocera Hydro WAVE - Page 58

58 User Manual
 Flash to choose a flash setting (back
camera only). Select from Auto, ON,
or OFF.
 Self-timer to choose a timer setting.
Select from 10 seconds, 5 seconds,
2 seconds, or OFF.
 HDR to combine multiple exposures
into a single image (back camera
only). Select ON or OFF.
 Image stabilization to minimize the
effect of camera movement while
shooting. Select Auto, ON, or OFF.
 Touch shutter to take a picture by
tapping the screen. Select ON or
OFF.
 Smile shutter automatically detects
a smile on a face and shoots a smile
without touching the shutter button.
(back camera only). Select ON or
OFF.
 Blink detection allows you to know
right away whether one of your
subjects blinked (back camera only).
Select ON or OFF.
● MOVIE
 Size to choose the default size for
videos. Select from
FullHD(1920x1080),
HD720p(1280x720), VGA(640x480),
or QVGA(320x240).
 Light to choose a light setting (back
camera only). Select from Auto, ON,
or OFF.
 Image stabilization to minimize the
effect of camera movement while
recording. Select ON or OFF.
● GENERAL
 Exchange camera to switch
between the back camera and the
front camera.
 EV compensation to make
adjustments to exposure (back
camera only). Tap the slider bar to
increase or decrease the value.
 White balance to set the white
balance (back camera only). Select
from Auto, Sunlight, Cloudy,
Fluorescent(White daylight),
Fluorescent(Daylight), or
Incandescence lamp.
 Focus to choose areas of the screen
to focus on (back camera only).
Select from Face priority, or Center.
 Auto exposure to adjust the
metering mode of pictures (back
camera only). Select from Center
weighted, Frame average, or Spot
metering.
 ISO speed to set the ISO level (back
camera only). Select from Auto, 100,
200, 400, or 800.
 Contrast allows you to use the slider
bar to set the contrast (back camera
only).