Kyocera KM-1650 Manual

KM-1650
These models use an electronic counter to record the meter readings.
This can be read off the LCD display or printed out in a report.
Use the following steps to view the electronic meter reading or print out
the report.
STEP 1 Press the System Menu /
Counter key on the Operator
Panel
(top left hand side).
The System Menu will appear on
the LCD display.
STEP 2 Press the DOWN ARROW key
on the keypad and highlight the
COUNTER CHECK menu
option.
Press the ENTER key to select
the option.
STEP 3
PRINT
To PRINT the Counter Report
press the DOWN ARROW key
on the keypad and highlight the
OUTPUT COUNT menu option
or press the number 4 key.
Press the ENTER key to output
the report.

Kyocera KM-1650 Specifications

General

Print Technology	Laser
Print Speed	16 ppm
Max Resolution	600 x 600 dpi
Paper Capacity	300 sheets
Memory	32 MB
Functions	Print, Copy, Scan
Type	Monochrome
Grayscale Half-Tones	256 levels
Max Document Enlargement	200%
Max Document Reduction	50%
Output Trays Capacity	250 sheets
Monthly Duty Cycle	15, 000 pages
Scan Type	Flatbed
First Copy Out Time B/W	5.9 seconds
Supported Media Type	Plain paper
Max Media Capacity	1, 300 sheets
Interface	USB 2.0
Original Size	A3 (11.7 in x 16.5 in) (max)