Why does my Kyocera Printer paper often jam?
Paper jams in your Kyocera printer can occur for several reasons. Ensure the paper is loaded correctly. The paper may be an unsupported type or in poor condition, so try removing it, turning it over, and reloading it. If the paper is curled, folded, or wrinkled, replace it with new paper. Also, check for and remove any loose scraps or jammed paper inside the machine.
What to do if my Kyocera Printer is not printing?
If your Kyocera printer is not printing, first, ensure the power cord is plugged into an AC outlet and that the main power switch is turned on. Check that the printer cable is securely connected. If the printer cable was connected before powering on the machine, power cycle the printer. Finally, verify that the print job is not paused; if it is, press the Resume key to resume printing.
What to do if my Kyocera Printer printouts are too light?
If your Kyocera printer's printouts are too light, several factors could be the cause. If the machine is in Auto Density mode, set the correct density level. If it's in Manual Density mode, select the correct density level. Shake the toner container from side to side to distribute the toner evenly. If there's a message indicating the need for toner, replace the toner container. Damp paper can also cause light prints, so replace the paper with new paper. Finally, check if EcoPrint mode is enabled and, if so, disable it.
How to fix dirty printouts from Kyocera Printer?
If your Kyocera printer produces dirty printouts, the platen or document processor may be dirty, so clean them. Also, the charger wire could be dirty, so ensure you clean that as well.
What to do if my Kyocera Printer printouts are too dark?
If your Kyocera printer's printouts are too dark, it could be due to the density settings. If the machine is in Auto Density mode, set the correct density level. If the machine is in Manual Density mode, select the correct density level.
How to fix vertical streaks on Kyocera Printer prints?
If you are seeing vertical streaks on your Kyocera printer prints, the inside of the machine may be dirty. Check the toner container and replace it if necessary. Also, clean the charger wire. Ensure that the main charger cleaner of the drum unit is in its original position.
How to resolve 'Load paper in cassette 1' error on Kyocera Printer?
If your Kyocera printer displays the 'Load paper in cassette 1' message, it means the indicated cassette is out of paper. Simply load paper into the cassette.
How to resolve 'Add toner' message on Kyocera Printer?
If your Kyocera printer displays the 'Add toner' message, replace the toner container.
How to fix fuzzy printouts from Kyocera Printer?
If your Kyocera printer produces fuzzy printouts, and the machine is being used in very humid conditions, clean the charger wire.
How to resolve 'Load paper in MP Tray' error on Kyocera Printer?
If your Kyocera printer displays the 'Load paper in MP Tray' message, load the paper in the multi purpose tray which is of the size and type indicated on the Message Display.
General| Type | All-in-One Printer |
|---|---|
| Functions | Print, Copy, Scan, Fax |
| Print Technology | Laser |
| Print Speed (Black) | 28 ppm |
| Monthly Duty Cycle | 30, 000 pages |
| Paper Capacity | 250 sheets |
| Scan Resolution | 600 x 600 dpi |
| Copy Speed (Black) | 28 cpm |
| Copy Resolution | 600 x 600 dpi |
| Fax Modem Speed | 33.6 Kbps |
| Connectivity | USB 2.0, Ethernet |
| Maximum Paper Size | A4 |
| Scan Type | Flatbed |
| Operating System Compatibility | Windows |
| Print Resolution | 600 x 600 dpi, 1200 x 1200 dpi (with KIR) |
To Next Page
