Kyocera KM-3060 - Page 289

2H0/2HZ
2-3-19
YC5 1 SCAN4 O 0/3.3 V DC (pulse) Scan signal 4
Connected
to the upper
operation
unit PWB
2 SCAN5 O 0/3.3 V DC (pulse) Scan signal 5
3 LED5 O 0/3.3 V DC (pulse) Operation panel Indicator LED drive signal 5
4 LED6 O 0/3.3 V DC (pulse) Operation panel Indicator LED drive signal 6
5 LED7 O 0/3.3 V DC (pulse) Operation panel Indicator LED drive signal 7
6 S_LED0 O 0/3.3 V DC (pulse) Operation panel Indicator LED drive signal 0
7 S_LED1 O 0/3.3 V DC (pulse) Operation panel Indicator LED drive signal 1
8SGND -- Ground
YC6 1 SCAN5 O 0/3.3 V DC (pulse) Scan signal 5
Connected
to the front
operation
unit PWB
2 LED5 O 0/3.3 V DC (pulse) Operation panel Indicator LED drive signal 5
3 LED6 O 0/3.3 V DC (pulse) Operation panel Indicator LED drive signal 6
4 S_LED1 O 0/3.3 V DC (pulse) Operation panel Indicator LED drive signal 1
5SGND -- Ground
YC7 1 VO2(+) O Analog Speaker sound signal (+)
Connected
to the
speaker
2 VO1(-) O Analog Speaker sound signal (-)
YC8 1 TOP I Analog Touch panel X+ position signal
Connected
to the touch
panel
2 LEFT I Analog Touch panel Y+ position signal
3 BOTTOM I Analog Touch panel X- position signal
4 RIGHT I Analog Touch panel Y- position signal
YC11 1SGND -- Ground
Connected
to the main
PWB
2SGND -- Ground
3PGND -- Ground
4 +5V I 5 V DC 5 V DC power input from MPWB
5 +5V I 5 V DC 5 V DC power input from MPWB
6 +12VSL I 12 V DC 12 V DC power input from MPWB
YC12 1SGND -- Ground
Connected
to the LCD
2SGND -- Ground
3 B5 O 0/3.3 V DC LCD control signal B5
4 B4 O 0/3.3 V DC LCD control signal B4
5 B3 O 0/3.3 V DC LCD control signal B3
6SGND -- Ground
7 B2 O 0/3.3 V DC LCD control signal B2
8 B1 O 0/3.3 V DC LCD control signal B1
9 B0 O 0/3.3 V DC LCD control signal B0
10 SGND - - Ground
11 G5 O 0/3.3 V DC LCD control signal G5
12 G4 O 0/3.3 V DC LCD control signal G4
13 G3 O 0/3.3 V DC LCD control signal G3
14 SGND - - Ground
15 G2 O 0/3.3 V DC LCD control signal G2
16 G1 O 0/3.3 V DC LCD control signal G1
17 G0 O 0/3.3 V DC LCD control signal G0
Connector Pin No. Signal I/O Voltage Description