FAX Operation (Advanced)
4-28 OPERATION GUIDE
Accessing COMMAND CENTER
1
Open the web browser.
2
In the Address or Location bar, enter the machine’s IP address as the URL,
e.g. http://192.168.48.21/. The web page displays basic information about
the machine and COMMAND CENTER as well as the current status of the
machine.
3
Select a category from the navigation bar on the left to view and set values
for that particular category.
4
If administrator privileges have been enabled on COMMAND CENTER,
remember to enter the correct user name and password when trying to
access the relevant screens.
RX/Forward Requirements Settings
FAX/i-FAX > Common > RX/Forward Requirements > General
Specify the RX/forward requirements settings.
To Next Page
Loading...
