FAX Operation (Advanced)
OPERATION GUIDE 4-31
4
Requirement List Settings
FAX/i-FAX > Common > RX/Forward Requirements > Requirement
List
Specify the requirement list settings.
The settings available on the Requirement List page are shown below.
Item Description
Not complying with the
requirements
On is displayed when forwarding settings not conforming to the requirements
list are enabled and Off when disabled. To specify forwarding settings not
conforming to the requirements list, click Advanced. (Refer to Advanced Non-
Conformity with Requirements List on page 4-36.)
Requirement List Displays the registered forwarding settings. Click the checkboxes for the
forwarding setting to be enabled so that they are ticked. To change a
forwarding setting, click the name of the setting to be changed. The
Requirement List - Detail/Edit page appears. (Refer to Requirement List -
Detail/Edit on page 4-34.)
To Next Page
Loading...
