Kyocera KM-6030 - Page 203

2FB/2FC-4
1-5-42
C8170 Document finisher* front upper side
registration guide problem
• During initialization, the front upper
side registration guide is not detected
in the home position within 3 s after
the guide returns to the home position.
JAM87 is indicated the first time this
problem occurs. If the problem occurs
after initialization when the front cover
is opened and closed, the problem is
in the front upper side registration
guide.
• When the front upper side registration
guide is operated from the home posi-
tion, the front upper side registration
home position sensor does not turn off
within 500 ms.
Loose connection
of the front upper
side registration
guide motor con-
nector.
Reinsert the connector. Also check for conti-
nuity within the connector cable. If none,
remedy or replace the cable.
Malfunction of the
front upper side
registration guide
motor.
Replace the front upper side registration
guide motor and check for correct operation.
Malfunction of the
front upper side
registration guide
home position sen-
sor.
Replace the front upper side registration
guide home position sensor and check for
correct operation.
Loose connection
of the front upper
side registration
guide home posi-
tion sensor con-
nector.
Reinsert the connector. Also check for conti-
nuity within the connector cable. If none,
remedy or replace the cable.
Defective finisher
main PWB.
Replace the finisher main PWB and check
for correct operation.
C8180 Document finisher* rear upper side
registration guide problem
• During initialization, the rear upper
side registration guide is not detected
in the home position within 3 s after
the guide returns to the home position.
JAM87 is indicated the first time this
problem occurs. If the problem occurs
after initialization when the front cover
is opened and closed, the problem is
in the rear upper side registration
guide.
• When the rear upper side registration
guide is operated from the home posi-
tion, the rear upper side registration
home position sensor does not turn off
within 500 ms.
Loose connection
of the rear upper
side registration
guide motor con-
nector.
Reinsert the connector. Also check for conti-
nuity within the connector cable. If none,
remedy or replace the cable.
Malfunction of the
rear upper side
registration guide
motor.
Replace the rear upper side registration
guide motor and check for correct operation.
Malfunction of the
rear upper side
registration guide
home position sen-
sor.
Replace the rear upper side registration
guide home position sensor and check for
correct operation.
Loose connection
of the rear upper
side registration
guide home posi-
tion sensor con-
nector.
Reinsert the connector. Also check for conti-
nuity within the connector cable. If none,
remedy or replace the cable.
Defective finisher
main PWB.
Replace the finisher main PWB and check
for correct operation.
Code Contents
Remarks
Causes Check procedures/corrective measures