Why are the printouts from my Kyocera TASKalfa 181 All in One Printer wrinkled?
Wrinkled printouts from your Kyocera All in One Printer can be due to: * A dirty paper separator on the paper feed unit, so clean the paper separator. * Damp paper, so replace the paper with new paper. * Improper paper orientation, so change the orientation in which the paper is positioned.
What to do if Kyocera TASKalfa 181 says 'Remove paper from Finisher. Press START key.'?
If your Kyocera All in One Printer displays 'Remove paper from Finisher. Press START key.', there are already 250 sheets of paper stored in the optional finisher during copying. Remove the paper.
What to do if my Kyocera TASKalfa 181 All in One Printer says 'Add paper in cassette'?
If your Kyocera All in One Printer displays 'Add paper in cassette', it means the print data does not match the size or type of paper in the cassette. To resolve this, press the Paper Selection key to select the desired paper source, and then press the Enter key.
What does 'Receive Doc. in Mem.' mean on my Kyocera TASKalfa 181 All in One Printer?
The 'Receive Doc. in Mem.' message on your Kyocera All in One Printer means that received documents were stored in memory because there was no paper in the drawer. Once you load paper into the drawer, the documents stored in memory will be printed. If 'Add Paper (XX Cassette)' is also displayed, load paper of the indicated size.
What to do if Kyocera All in One Printer says 'Remove paper from Top tray. Press START key.'?
If your Kyocera All in One Printer displays 'Remove paper from Top tray. Press START key.', the output tray capacity is exceeded during copying. Remove the paper.
What does 'Set Toner Container' mean on Kyocera TASKalfa 181?
The 'Set Toner Container' message on your Kyocera All in One Printer means that the toner container is either not set or is not set properly.
What does 'Misfeed in DP.' mean on Kyocera TASKalfa 181?
The message 'Misfeed in DP.' on your Kyocera All in One Printer indicates that you should remove the original(s).
What does 'Add toner' mean on Kyocera TASKalfa 181?
The 'Add toner' message on your Kyocera All in One Printer indicates that there is insufficient toner left in the indicated toner container, or the toner container has run out of toner.
What to do if Kyocera TASKalfa 181 says 'Memory Full'?
If your Kyocera All in One Printer displays 'Memory Full', you have several options: * Press the Enter key and select Yes to transmit the documents that have already been completely scanned. * Select No to completely cancel the transmission. If you do not press the Enter key, the Auto Clear function will erase all data from memory after a certain time. After canceling, you can try the transmission again once memory is available.
What does 'Load XX paper in cass.' mean on my Kyocera All in One Printer?
The 'Load XX paper in cass.' message on your Kyocera All in One Printer means that you need to load paper of the size indicated in the message display. This can occur because the Fixed Size mode is selected in the Paper Feed Selection setting or because the sizes of the received documents and the paper in the selected drawer are not compatible for printing. Load paper of the same size as that of the received documents.
General| Print Technology | Laser |
|---|---|
| Type | Monochrome |
| Print Resolution | 600 x 600 dpi |
| Copy Resolution | 600 x 600 dpi |
| Scan Resolution | 600 x 600 dpi |
| Duplex Printing | Manual |
| Memory | 64 MB |
| Functions | Print, Copy, Scan |
| Print Speed | 18 ppm |
| Copy Speed | 18 cpm |
| Paper Capacity | 250 sheets |
| Connectivity | USB 2.0 |
| Supported Operating Systems | Linux |
To Next Page
