What to do if Kyocera TASKalfa 181 says 'Remove paper from Finisher. Press START key.'?
If your Kyocera All in One Printer displays 'Remove paper from Finisher. Press START key.', there are already 250 sheets of paper stored in the optional finisher during copying. Remove the paper.
What to do if my Kyocera TASKalfa 181 displays 'Paper Misfeed'?
If your Kyocera All in One Printer displays 'Paper Misfeed', you should remove the jammed paper from the fax machine, ensuring no loose scraps are left behind.
What does 'Load XX paper in cass.' mean on my Kyocera All in One Printer?
The 'Load XX paper in cass.' message on your Kyocera All in One Printer means that you need to load paper of the size indicated in the message display. This can occur because the Fixed Size mode is selected in the Paper Feed Selection setting or because the sizes of the received documents and the paper in the selected drawer are not compatible for printing. Load paper of the same size as that of the received documents.
What to do if Kyocera TASKalfa 181 says 'Memory Full'?
If your Kyocera All in One Printer displays 'Memory Full', you have several options: * Press the Enter key and select Yes to transmit the documents that have already been completely scanned. * Select No to completely cancel the transmission. If you do not press the Enter key, the Auto Clear function will erase all data from memory after a certain time. After canceling, you can try the transmission again once memory is available.
What to do if Kyocera All in One Printer says 'Remove paper from Top tray. Press GO.'?
If your Kyocera All in One Printer displays 'Remove paper from Top tray. Press GO.', the output tray capacity is exceeded during printing. Remove the paper. Press the Print key. Press U or V to select GO, and then press the Enter key. Printing will resume.
What does 'Set Toner Container' mean on Kyocera TASKalfa 181?
The 'Set Toner Container' message on your Kyocera All in One Printer means that the toner container is either not set or is not set properly.
What to do if Kyocera All in One Printer operation panel doesn't respond?
If the operation panel of your Kyocera All in One Printer does not respond when the main power switch is turned on, plug the power cord into an AC outlet.
What does 'Misfeed in DP' mean on my Kyocera TASKalfa 181?
The message 'Misfeed in DP' on your Kyocera All in One Printer indicates that originals have jammed in the optional document processor. Leave the main power switch on and follow the appropriate procedure to remove the jammed originals.
Why are the printouts from my Kyocera TASKalfa 181 All in One Printer wrinkled?
Wrinkled printouts from your Kyocera All in One Printer can be due to: * A dirty paper separator on the paper feed unit, so clean the paper separator. * Damp paper, so replace the paper with new paper. * Improper paper orientation, so change the orientation in which the paper is positioned.
What to do if my Kyocera TASKalfa 181 All in One Printer says 'Add paper in cassette'?
If your Kyocera All in One Printer displays 'Add paper in cassette', it means the print data does not match the size or type of paper in the cassette. To resolve this, press the Paper Selection key to select the desired paper source, and then press the Enter key.
General| Print Technology | Laser |
|---|---|
| Type | Monochrome |
| Print Resolution | 600 x 600 dpi |
| Copy Resolution | 600 x 600 dpi |
| Scan Resolution | 600 x 600 dpi |
| Duplex Printing | Manual |
| Memory | 64 MB |
| Functions | Print, Copy, Scan |
| Print Speed | 18 ppm |
| Copy Speed | 18 cpm |
| Paper Capacity | 250 sheets |
| Connectivity | USB 2.0 |
| Supported Operating Systems | Linux |
To Next Page
