6 Finishing
In the Finishing tab, you can specify document finishing features like stapling
and separation.
These features are available in the Finishing tab:
Staple on page 6-1
Separation on page 6-2
Staple
The Staple feature is available on printing systems with an optional finishing
device installed.
After installation, optional equipment must be selected in the printer driver in the
Device Settings tab.
Note: Staple and Separation features cannot be used together.
If Printer default is selected as the Destination in the Basic tab, the selection
of an option in the Finishing tab results in the automatic selection of a
destination compatible with that finishing option. The destination is
automatically updated to the first available output tray that supports the selected
finishing option.
Staple selects the Destination automatically. If the Finishing options are
changed, the Destination selection is not affected.
KX DRIVER
6-1
To Next Page
Loading...
