Kyocera TASKalfa 181

Device Settings
User Settings
User Settings lets you specify user and department names, select the default
unit of measure, and change the driver display language.
In a client/server environment, this feature is unavailable to a client logged in as
a restricted user.
Identification
Identification lets you identify your print job with a User name and
Department name, up to 31 characters, that can appear in the Operation
panel message. The User name can be used to identify a print job stored on
the hard disk.
Setting User Identification
You can type User name and Department information to be used with the
Operation panel message and Job Storage (e-MPS) features.
1
In Device Settings > User, type your preferred name in the User name text
box.
2
Type your department or group name in Department text box.
You can type up to 31 characters in the User name and Department text
boxes.
Units
You can set Inches or Millimeters as the unit of measurement. This is used for
the following settings:
• Custom page size setting in the Page Sizes dialog box in the Basic tab.
• Spacing setting in the Watermark Add and Edit dialog boxes in the
Advanced tab.
• Poster settings and Gutter settings in the Layout tab.
Selecting a Unit of Measurement
You can select a unit for displaying measurements in the user interface.
1
In the Device Settings tab, click User.
2
Select Inches or Millimeters.
Language Preference
The Language preference option specifies the user interface language of the
Device Settings tab of Printer Properties and all tabs of Printing
Preferences.
Available languages vary depending on your locale and your computer settings.
Setting Language Preference
You can select a user interface language.
1
In Device Settings > User, select the desired language from the Select
language list.
KX DRIVER
2-9