Kyocera TASKalfa 181 - Job Storage (E-MPS) Options; Temporary; Storing a Temporary Print Job

Job
E-MPS is a multitier solution that provides advanced print management, directly
from the desktop. By storing a job in the printing system, you can print it from
the operation panel without sending it again from the computer.
To use the Job storage (e-MPS) features, you can set a User name in the
User Settings dialog box, available in the Device Settings tab.
Job Storage (e-MPS) options
Storage Access code When job is When job is Operation
location required printed deleted from panel e-MPS
memory location
Temporary Hard disk No When sent When hard disk None
from the is full and older
computer; it temporary jobs
can be have been
reprinted deleted
Permanent Hard disk No When sent When manually None
from the deleted
computer; it
can be
reprinted
Virtual mail Hard disk No When printed When printed e-MPS / Print
box from operation VMB Data
panel
Quick copy Hard disk No When sent When printing e-MPS / Quick
from the system is Copy
computer turned off or
hard disk is full
Proof and hold Hard disk or No One copy when When printing e-MPS / Quick
RAM disk job is sent; system is Copy
remaining turned off
copies later
Private print Hard disk or Yes When access When printing e-MPS /
RAM disk code is entered system is Private/Stored
at operation turned off or
panel after printing
Job storage Hard disk Optional When printed When manually e-MPS /
from operation deleted Private/Stored
panel
Temporary
Use Temporary to print jobs and save them on the hard disk. When the hard
disk becomes full, Temporary jobs are replaced beginning with the oldest jobs.
If you do not want jobs to be removed, select the Permanent option.
Selecting Temporary as a storage option increases print speed on a multiple
copy job. The first copy of the job is rendered once, then all subsequent copies
are printed at the rated speed of the printing system.
Temporary jobs can be reprinted by installing and using the KM-NET VIEWER
utility, available on the Product Library CD.
Storing a Temporary Print Job
You can print a job and store it temporarily on the hard disk.
KX DRIVER
9-2