Kyocera TASKalfa 181

Device Settings
Setting the Memory
By default, the Memory setting matches the standard memory in the printing
system. If optional memory is installed, set the memory in the printer driver to
match the total amount of memory.
1
Install optional DIMM memory in the printing system.
2
In Device Settings, at the Memory text box, select the amount of total installed
memory by clicking the up and down arrows until the text box shows the correct
number of megabytes (MB).
You can use the Auto Configure feature to obtain memory information from the
printing system.
RAM Disk
If a hard disk is not installed, the RAM disk functions as a virtual hard disk,
saving print requests into the printing system’s memory. Because the RAM disk
is volatile memory, all data sent to the printing system is lost when the power is
turned off.
Note: When a hard disk is installed, the RAM disk feature is inactive.
Selecting Ignore application collation in the Compatibility Settings dialog
box lets the driver control collation. RAM disk can then increase the print speed
of collated multiple copies by sending the print job just once.
In a client/server environment, this feature is unavailable to a client logged in as
a restricted user.
Setting RAM Disk
If a hard disk is not installed, you can set the RAM disk to save print requests
into the printing system’s memory.
1
In Device Settings, in the Device options list, select RAM disk.
2
At the RAM disk text box, type or select the size of the RAM disk by clicking the
up and down arrows until the text box shows the correct number of megabytes
(MB).
3
At the printing system's operation panel, turn on RAM disk and set its size.
The maximum RAM disk size depends on the amount of installed memory.
Administrator Settings
Administrator Settings lets you specify Job accounting IDs, an Operation
panel message, display the Quick Print tab, and SNMP Settings, and set a
password to control access.
In a client/server environment, this feature is unavailable to a client logged in as
a restricted user.
User Guide
2-4