8
Changing the Method for Overwriting the Entire Hard Disk
Change the method for overwriting the entire hard disk. Refer to Overwriting on page 2 for details.
NOTE: The overwrite methods are used both for overwriting and hard disk initialization, and cannot therefore
be set individually.
Use the procedure below to select the interface.
1 Press the [System Menu] key.
2 Press [System/Network].
3 If user login is disabled, the user authentication
screen appears. Enter your login user name and
password and then press [Login]. For this, you
need to log in with administrator privileges. Refer to
the machine's Operation Guide for the default login
user name and password.
4 Press [Next] of Data Security.
5 Press [Next] of Hard Disk Initialization.
6 Enter the security password. By default, the code is
set 000000.
7 Press [Change] of Data Overwrite Method.
8 Press [3-time Overwrite (DoD)] (default) or
[Once Overwrite].
9 Press [OK].
To Next Page
Loading...
