Kyocera TASKalfa 3501i - System Initialization

9
System Initialization
Overwrite all the data stored in the system when disposing of the machine.
CAUTION: If you accidentally turn the main power switch off during initialization, the system might possibly
crash or initialization might fail.
NOTE: If you accidentally turn the main power switch off during initialization, turn the main power switch on
again. Initialization automatically restarts.
Use the procedure below to initialize the system.
1 Press the [System Menu] key.
2 Press [System/Network].
3 If the user authentication screen appears, enter the
login user name and login password, and press
[Login].
If the user authentication screen does not appear,
go to Step 4.
4 Press [Next] of Data Security.
5 Press [Next] of Hard Disk Initialization.
6 Enter the default security password, 000000.
7 Press [Execute] of System Initialization.
8 Press [Yes] on the screen to confirm the
initialization. Initialization starts.
9 When the screen appears to show initialization is
completed, press the Power key, check that the
Power key and memory indicators are OFF, and
turn the main power switch off and then on.
System/Network - Hard Disk Initialization
Data Overwrite Method:
Change
Close
Execute
Security Password:
System Initialization:
Status
Change
**********
Once Overwrite Method
02/02/2013 10:10