9-24
User Authentication and Accounting (User Login, Job Accounting) > Setting User Login Administration
1
Display the screen.
1 [System Menu/Counter] key > [User Login/Job Accounting]
2 [User Login Setting] > [Guest Authorization Set.] > [Guest Property]
2
Configure the settings.
Check the settings and change or add information as needed.
3
Register the group.
Select [Save].
If the login user name entry screen appears during operations, enter a login user name
and password, and select [Login]. For this, you need to login with administrator
privileges.
The factory default login user name and login password are set as shown below.
Login User Name: 3500
Login Password: 3500
To Next Page
Loading...
