10-30
Troubleshooting > Troubleshooting
Adjustment/Maintenance
Color Registration Procedure
Perform the color registration. However, if it is not resolved or to perform more detailed settings, use the manual
registration.
Auto Correction
1
Load paper.
2
Display the screen.
[System Menu/Counter] key > [Adjustment/Maintenance] > [Color Registration] > [Auto]
3
Print the chart.
Select [Start].
A chart is printed.
To perform color registration, verify that either Letter or A4 paper is loaded into a cassette.
Before performing color registration, be sure to perform Calibration on page 10-35. If color drift remains,
perform color registration. By performing color registration without performing Calibration, the color drift will
be resolved once, however, it may cause the serious color drift later.
• Load the paper with the print side facing up.
• After removing new paper from its packaging, fan the paper before loading it in the
multi-purpose tray.
Precaution for Loading Paper (page 3-3)
• Before loading the paper, be sure that it is not curled or folded. Paper that is curled
or folded may cause paper jams.
• Ensure that the loaded paper does not exceed the level indicator (see illustration
above).
• If paper is loaded without adjusting the paper length guide and paper width guide,
the paper may skew or become jammed.
To Next Page
Loading...
