Default Setting (System Menu)
8-6 OPERATION GUIDE
Adding a Custom Size and Media Type for Paper to Print
Set up a maximum of four frequently-used custom paper sizes. The custom size options are displayed on the
screen to select paper set in the multi purpose tray.
The table below lists the sizes that can be registered.
Up to four custom paper sizes can be added.
Select media type for each paper size.
Media type: Plain, Transparency, Rough, Vellum, Labels, Recycled, Preprinted, Bond, Cardstock, Color,
Prepunched, Letterhead, Thick, Envelope, Coated, High Quality, Custom 1-8
NOTE: Refer to Paper Weight on page 8-9 for Custom 1-8 for media type.
Use the procedure below to select a custom paper size and media type.
1 Press the System Menu key.
2 Press [Common Settings], [Next] of Original /
Paper Settings and then [Next] of Custom Paper
Size.
3 Press [Change] of any one of Custom 1 to Custom
4, on which you want to register the size.
4 Press [On], and then press [+],[–] or numeric keys
to enter X (horizontal) and Y (vertical) dimensions.
5 Press [Media Type] to select the type of paper and
press [OK] if necessary.
6 Press [OK].
7 Move to the copy or document box screen and
press the Reset key.
Input units Dimensions
Inch models H: 5.83 to 17" (in 0.01" increments)
V: 3.86 to 11.69" (in 0.01" increments)
Metric models H: 148 to 432 mm (in 1 mm increments)
V: 98 to 297 mm (in 1 mm increments)
Downloaded From ManualsPrinter.com Manuals
To Next Page
Loading...
