Default Setting (System Menu)
8-12 OPERATION GUIDE
Use the procedure below to set automatic detection of originals.
1 Press the System Menu key.
2 Press [Common Settings], [Next] of Original /
Paper Settings and then [Change] of Original Auto
Detect.
3 Select [A6] or [Hagaki] of A6/Hagaki.
Select [Off] to disable automatic detection or [On]
to enable automatic detection of Folio and 11x15"
respectively.
4 Press [OK].
Media for Auto Selection (Color/B&W)
Select a default media type for auto paper selection when [Auto] is selected of Paper Selection. If Plain is
selected, the paper source with plain paper loaded in the specific size is selected. Select [All Media Types] for
the paper source with any kind of paper loaded in the specific size.
NOTE: Default media types can be set for both Color and Black and White.
Use the procedure below to select the paper size and media type used by Auto Selection.
1 Press the System Menu key.
2 Press [Common Settings], [Next] of Original /
Paper Settings and then [Change] of Media for
Auto (Color) or Media for Auto (B & W).
3 Select [All Media Types] or any media type for
paper selection.
4 Press [OK].
Paper Source for Cover Paper
Select paper source for cover paper from Cassette 1-4 or Multi Purpose Tray. Cover is used for Booklet (see
page 4-29) and Cover (see page 4-32) modes.
NOTE: [Cassette 3] is displayed when either of the optional paper feeder or 3,000 sheet paper feeder is
installed, and [Cassette 4] is displayed when the optional paper feeder is installed.
Use the procedure below to select the paper source for the cover.
1 Press the System Menu key.
11x15" Select the 11×15" size for automatic
detection.
Item Description
Downloaded From ManualsPrinter.com Manuals
To Next Page
Loading...
