Kyocera TASKalfa 400ci - Page 394

Troubleshooting
10-12 OPERATION GUIDE
1105 Failed to send via SMB. Select [On] of the SMB settings on
the COMMAND CENTER.
2-14
Failed to send the e-mail. Select [On] of the SMTP settings on
the COMMAND CENTER.
Failed to send via FTP. Select [On] of the FTP settings on the
COMMAND CENTER.
Failed to send i-FAX. Select [On] of the i-FAX settings on
the COMMAND CENTER.
FAX System (Q)
Operation Guide
Chapter 8
"Internet Faxing
(i-FAX) (Option)"
1106 Failed to send the e-mail.
Failed to send i-FAX.
Check the sender address of SMTP
on the COMMAND CENTER.
2-14
1131 Failed to send via FTP. Select [On] of the secure protocol
settings on the COMMAND
CENTER.
2-14
1132 Failed to send via FTP. Check the followings of the FTP
server.
- Is FTPS available?
- Is the encryption available?
2-14
2101 Failed to send via SMB.
Failed to send via FTP.
Check the network and SMB settings.
Check the network and FTP settings.
- The network cable is connected.
- The hub is not operating properly.
- The server is not operating properly.
- Host name and IP address
- Port number
2-14
Failed to send the e-mail.
Failed to send i-FAX.
Check the network and COMMAND
CENTER.
- The network cable is connected.
- The hub is not operating properly.
- POP3 server name of the POP3
user
- SMTP server name
2102 Failed to send via FTP. Check the followings of the FTP
server.
- Is FTP available?
- The server is not operating properly.
–
Failed to send the e-mail.
Failed to send i-FAX.
Check the network.
- The network cable is connected.
- The hub is not operating properly.
- The server is not operating properly.
Error
Code
Error Message Corrective Actions Reference Page
Downloaded From ManualsPrinter.com Manuals