Kyocera TASKalfa 400ci - Page 393

Troubleshooting
OPERATION GUIDE 10-11
10
Responding to Send Error
When an error occurs during transmission, Send Error appears. Check the error code and error message below,
and follow the corresponding corrective actions.
Error
Code
Error Message Corrective Actions Reference Page
1101 Failed to send the e-mail.
Failed to send i-FAX.
Check the host name of the SMTP
server on the COMMAND CENTER.
2-14
Failed to send via FTP. Check the host name or IP address
of FTP.
1102 Failed to send via SMB. Check the SMB settings.
- Login user name and login
password
* If the sender is a domain user,
specify the domain name.
- Host name
- Path
3-33
Failed to send the e-mail.
Failed to send i-FAX.
Check the followings on the
COMMAND CENTER.
- SMTP login user name and login
password
- POP3 login user name and login
password
Failed to send via FTP. Check the FTP settings.
- Login user name and login
password
* If the sender is a domain user,
specify the domain name.
- Path
- Folder share permissions of the
recipient
1103 Failed to send via SMB. Check the SMB settings.
- Login user name and login
password
* If the sender is a domain user,
specify the domain name.
- Path
- Folder share permissions of the
recipient
3-33
1104 Failed to send the e-mail. Check the e-mail address.
* If the address is rejected by the
domain, you cannot send the e-mail.
3-32
Failed to send i-FAX. Check the i-FAX address.
*If the address is rejected by the
domain, you cannot send i-FAX.
FAX System (Q)
Operation Guide
Chapter 8
"Internet Faxing
(i-FAX) (Option)"
Downloaded From ManualsPrinter.com Manuals