Management
OPERATION GUIDE 11-11
11
Use the procedure below.
1 Press the System Menu key.
2 Press [User Login/Job Accounting].
3 If user login administration is disabled, the user
authentication screen appears. Enter your login
user name and password and then press [Login].
For this, you need to login with administrator
privileges. Refer to Adding a User on page 11-4 for
the default login user name and password.
4 Press [Next] of User Login Setting, [Next] of Group
Authorization Set., [Change] of Group List, and
then [Add].
Copy Restriction Select whether or not to reject usage of copy
functions.
Copy Restr.
(Color)
Select whether or not to reject usage of the color
copy functions.
Copy Restriction
(Full Color)
Select whether or not to reject usage of only the full
color copy functions.
Send Restriction Select whether or not to reject usage of the send
functions.
FAX TX
Restriction
Select whether or not to reject usage of the FAX
transmissions.
Storing Restr.
in Box
Select whether or not to reject usage of storing in
the document boxes.
Storing Restr. in
Memory
Select whether or not to reject usage of storing in
the removable memory.
* For Group ID, specify PrimaryGroupID assigned by ActiveDirectory
of Windows. If you are using Windows Server 2008, check Attribute
Editor tab of user properties. If you are using Windows Server 2000/
2003, check ADSIEdit. ADSIEdit is a support tool included on the
installation CD-ROM for Windows Server OS (under
\SUPPORT\TOOLS).
Item Description
To Next Page
Loading...
