Kyocera TASKalfa 400ci - Page 424

Management
11-12 OPERATION GUIDE
5 Press [Change] of Group ID.
6 Enter the group ID and press [OK].
7 Press [Change] of Group Name.
8 Enter the group name and press [OK].
NOTE: Refer to the Character Entry Method on
Appendix-7 for details on entering characters.
9 Press [Change] of Access Level.
10 Select the user access privilege and press [OK].
11 Press [Change] of Print Restr. (B & W).
12 Select [Reject Usage] or [Off] and press [OK].
13 Follow steps 11 and 12 above to set Print Restr.
(Full Color), Copy Restr. (B & W), Copy Restr.
(SingleColor), Copy Restr. (Full Color), Send
Restriction, FAX TX Restriction, Storing Restr. in
Box, and Storing Restr. in Memory.
14 Press [Register] to add a new group on the group
list.
Obtain Network User Property
Set the required information to obtain the network user property from the LDAP server.
NOTE: To obtain the network user property from the LDAP server, [Network Authentication] must be selected
for the authentication method in Enabling/Disabling User Login Administration on page 11-2.
The table below explains the required information to be registered.Use the procedure below.
Group:xxx
Group ID:
Copy Restriction:
Access Level:
Register
Copy Restriction (Color):
Print Restriction:
Print Restriction (Color):
Cancel
Change
Group Name:
2008/10/10 10:10
Status
Change
Change
Change
Copy Restr. (Full Color):
Change
Change Change
Change
Send Restriction:
Change
1/2
Item Description
Server Name*
1
Enter the LDAP server name or the IP address (up to 64 characters).
Port Set the LDAP port number or use the default port 389.
Name 1*
2
Enter the LDAP Attribute to obtain the user name to be displayed from the
LDAP server (up to 32 characters).
Name 2*
3
Enter the LDAP Attribute to obtain the user name to be displayed from the
LDAP server (up to 32 characters).
E-mail Address*
4
Enter the LDAP Attribute to obtain the e-mail address from the LDAP server (up
to 32 characters).
Search Timeout Set the amount of time to wait before time-out in seconds (from 5 to 255
seconds).
Downloaded From ManualsPrinter.com Manuals