Setup and Registration > Encryption
6-35
Encryption
This method allows you to communicate with originals encrypted by the sending system. Therefore, even when a third
party tries to view the originals in the middle of communication by some means, the third party is prevented from
knowing the actual contents of the originals. The originals received are reverted to the originals as they were before
transmission (decrypted) by the receiving system, and printed. This is an extremely effective communication method for
sending confidential documents that are not to be opened by a third party.
In encryption communication, in order to encrypt and decrypt originals, the sending and receiving systems must use the
same 16-digit encryption key. When the encryption key differs between the sending system and the receiving system,
the encryption cannot be conducted. Therefore, the sending system and the receiving system need to have the same
encryption key and 2-digit key No. registered in advance.
Description of settings at sending and receiving systems
†When the machine receives originals, the Encryption Box is not used.
In order to use encryption communication, the fax of the other party needs to be an our-brand system with the same
type of encryption functions.
Settings Sending system Receiving system Reference page
Encryption Key No. (A) 2 digits (B) 2 digits 6-36
Encryption Key (C) 16 digits (C) 16 digits 6-36
Key No. of Address Book (or
when the number is directly
dialed)
(A) 2 digits 6-36
Receiving system encryption
box number
â€
(D) 4 digits 6-37
Encryption Box No.
â€
(D) 4 digits -
Key No. in reception setting (B) 2 digits 6-39
Set the same characters for the numbers indicated by the same letter in parentheses. For example, the same
characters should be used as the encryption key (C) in both the sending and receiving systems.
To Next Page
Loading...
Need help?
General
