FAX Operation (Basic) > Dialing the Same Receiving System (Redial)
3-23
Dialing the Same Receiving System (Redial)
Redial is a function allowing you to dial the last entered number once again.
When [Recall] is set to [Prohibited] in the system menu, you cannot use Redial. For details, refer to the Operation Guide
for the machine. (8 Setup and Registration (System menu) > Send > Recall)
Automatic Redial
This function automatically redials a receiving system that does not respond when you try to send fax.
No particular setting is required for automatic redial. Because the machine redials repeatedly at a regular interval, you
do not need to worry even when the communication by the receiving system is prolonged.
Manual Redial (Recall)
Use this when the receiving system does not respond when you have tried to send a fax. When you want to send the fax
to the same receiving system, press [Recall], and you can call the receiving system you dialed on the destination list.
1 Press [Recall].
The receiving system you dialed is displayed on the destination list.
2 Press the [Start] key.
The transmission will start.
When using direct transmission, the machine does not automatically redial.
You can change the number of automatic redials from between 0 and 14. For details, refer to Retry Times on page 6-16.
You cannot send delayed transmission immediately while the machine is waiting for redial.
When the last transmission included multi-address transmissions and computers
and e-mail destinations, they are also displayed. If necessary, add or delete the
receiving system.
When On is selected in Dest. Check before Send, a destination confirmation screen
is displayed when you press the [Start] key. For details, refer to Confirmation
Screen of Destinations on page 5-12.
Recall information is canceled in the following conditions.
• When you turn the power off
• When you send a next fax (new recall information is registered)
• When you log out
Status
ABCD abcd@efg.com
Address
Book
FAX No.
Entry
No.
1/100
AAA BBB CCC DDD
FFF GGG HHH III JJJ
00040003 00050001 0002
0006 0007 0008 0009 0010
Check
Destinations
Destination
Pause
Backspace
EEE
Space
Detail Delete RecallChainDirectOn Hook
Org./Sending
Data Format
Quick SetupDestination Image Quality Advanced
Setup
Program
Enter Destination.
001/001
02/02/2013 10:10
To Next Page
Loading...
Need help?
General
