Kyocera TASKalfa 520i - Setting: Adjustment of Booklet Stapling Position; Setting: Adjustment of Upper;Lower Side Registration Home Position

2KR/2KS
1-3-70
U246
Setting: [BOOKLET FOLDER]
1. Select the item to be set.
Setting: Adjustment of upper/lower side registration home position
1. Select [WIDTH U HP ADJ] or [WIDTH L HP ADJ].
2. Change the setting using the +/- or numeric keys.
3. Press the start key. The value is set.
4. Press the stop key. The screen for selecting a maintenance item No. is displayed.
5. Enter maintenance mode U240 and select [BOOKLET], then [WIDTH TEST(A3)].
The width guides of the centerfold unit will move to A3-size position.
6. Pull the centerfold unit, insert paper between the guides and check that paper is abut the guides.
7. Repeat the above adjustment until paper is properly in position.
Setting: Adjustment of booklet stapling position
1. Select [STAPLE POS ADJ (A4R/LTR)], [STAPLE POS ADJ (B4R/LGR)] or [STAPLE POS ADJ (A3/LD)].
2. Change the setting using the +/- or numeric keys.
When staples are placed too far right (sample 1), decrease the preset value. When staples are placed
too far left (sample 2), increase the preset value.
Reference value: within
± 2 mm
Figure 1-3-22
3. Press the start key. The value is set.
Maintenance
item No.
Description
Display Description
WIDTH U HP ADJ Adjustment of upper side registration home position
WIDTH L HP ADJ Adjustment of lower side registration home position
STAPLE POS ADJ (A4R/LTR) Adjustment of booklet stapling position for A4/Letter size
STAPLE POS ADJ (B4R/LGR) Adjustment of booklet stapling position for B4/Legal size
STAPLE POS ADJ (A3/LD) Adjustment of booklet stapling position for A3/Ledger size
SADDLE POS ADJ (A4R/LTR) Adjustment of center folding position for A4/Letter size
SADDLE POS ADJ (B4R/LGR) Adjustment of center folding position for B4/Legal size
SADDLE POS ADJ (A3/LD) Adjustment of center folding position for A3/Ledger size
Description
Setting
range
Initial
setting
Change in
value per step
Adjustment of upper side registration home position -20 to 20 0 0.104 mm
Adjustment of lower side registration home position -46 to 46 0 0.104 mm
Description
Setting
range
Initial
setting
Change in
value per step
Adjustment of booklet stapling position for A4/Letter size -10 to 10 0 0.55 mm
Adjustment of booklet stapling position for B4/Legal size -10 to 10 0 0.55 mm
Adjustment of booklet stapling position for A3/Ledger size -10 to 10 0 0.55 mm
Sample 2
Sample 1
2 mm2 mm