EasyManua.ls Logo

Kyocera TASKalfa 520i - Page 167

Kyocera TASKalfa 520i
508 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
2KR/2KS
1-4-9
Finisher 84
Jam in eject section of
right sub tray (3000-
sheet document fin-
isher only)
Eject switch 2 (ESW2) is not turned off even if a specified
time has elapsed after the machine eject signal was
received.
1209 ms
Eject switch 2 (ESW2) is not turned on even if a specified
time has elapsed after the machine eject signal was
received.
1209 ms
Eject switch 2 (ESW2) is not turned off within specified time
of its turning on.
2313 ms
85
Jam in eject section of
left sub tray (3000-
sheet document fin-
isher only)
Eject switch 3 (ESW3) does not turn off within specified
time of paper entry sensor (PES) turning on.
1426 ms
Eject switch 3 (ESW3) does not turn on within specified
time of paper entry sensor (PES) turning on.
1426 ms
Eject switch 3 (ESW3) is not turned off within specified time
of its turning on.
2313 ms
86
Jam in eject section of
internal tray 1 (3000-
sheet document fin-
isher only)
Internal tray entry sensor 1 (ITPES1) is not turned on even
if a specified time has elapsed after the eject signal was
received.
2070 ms
87
Jam in eject section of
inner tray 2 (3000-
sheet document fin-
isher only)
Inner tray entry sensor 2 (ITPES2) does not turn on within
specified time of the paper entry sensor (PES) turning on.
1322 ms
Inner tray entry sensor 2 (ITPES2) does not turn off within
specified time of the paper entry sensor (PES) turning off.
676 ms
88
Jam in eject section of
main tray (3000-sheet
document finisher only)
Eject switch 1 (ESW1) is not turned on within specified
time.
1324 ms
At the time of bundle up initial operation, paper conveying
belt home position sensor 1 (PCBHPS1) does not turn on.
-
At the time of bundle down initial operation, paper convey-
ing belt home position sensor 2 (PCBHPS2) does not turn
on.
-
At the time of side registration standby operation, side reg-
istration home position sensor 1 (SRHPS1) does not turn
off within specified time.
500 ms
At the time of side registration standby operation, side reg-
istration home position sensor 2 (SRHPS2) does not turn
off within specified time.
500 ms
Section Description Conditions Specified time

Table of Contents

Related product manuals