Kyocera TASKalfa 620 User Manual (English)

Other manuals for Kyocera TASKalfa 620

Operation Guide212 pages

Service Manual521 pages

Questions and Answers:

C
Chad ThomasAug 13, 2025
What to do if there is a paper jam in the conveyor section to Tray A of Kyocera Printer Accessories?
- S
  Shaun AustinAug 13, 2025
  If there is a paper jam in the conveyor section to Tray A of your Kyocera Printer Accessories: * Lift open Tray B. * If the jammed paper is visible in the eject slot, gently pull it out in the direction of ejection without tearing it.
D
diana10Aug 16, 2025
What to do if there is a paper jam in the conveyor section to Tray B of Kyocera Printer Accessories?
- M
  Melissa ReedAug 16, 2025
  If you have a paper jam in the conveyor section to Tray B of your Kyocera Printer Accessories: * If the jammed paper is visible in the eject slot, pull it out in the direction of ejection, without tearing it. * Open the upper cover and remove the jammed paper. * Close the upper cover.
R
Richard GarciaAug 21, 2025
What to do if a paper jam occurs in the Multi-Job Tray Unit of Kyocera Printer Accessories?
- A
  amandamartinAug 21, 2025
  If a paper jam occurs in the Multi-Job Tray Unit of your Kyocera Printer Accessories, remove it without tearing it. Also, open the upper cover to the Document Finisher and remove the jammed paper.
C
Cody HernandezAug 25, 2025
What to do if there is a paper jam in the conveyor section to the internal tray of Kyocera Printer Accessories?
- C
  courtneydoyleAug 25, 2025
  If there is a paper jam in the conveyor section to the internal tray of your Kyocera Printer Accessories: 1. If the jammed paper is visible in the eject slot, pull it out in the direction of ejection, without tearing it. 2. Grasp the front cover handle and open the front cover. 3. Turn internal tray lever G3 clockwise and pull out the internal tray. 4. Hold the internal tray release lever (G4) and open the internal tray. 5. Remove the jammed paper. 6. Hold the internal tray release lever (G4) and close the internal tray. 7. Push down on the frame to lock the internal tray in place. 8. Set the internal tray and turn the lever upright. Close the cover.
J
James TurnerAug 28, 2025
What to do if there is a paper jam in the conveyor section of the Center-Folding Unit of Kyocera Printer Accessories?
- R
  Richard DavisAug 28, 2025
  If there is a paper jam in the conveyor section of the Center-Folding Unit of your Kyocera Printer Accessories: * Grasp the front cover handle and open the front cover. * Turn the unit release lever (G6), and then hold the unit release handle (G7) and move the Center-Folding Unit in the paper ejection direction. * If the jammed paper is visible from under the internal tray, remove the jammed paper. * If paper is jammed inside the internal tray, remove the jammed paper using the conveyor guide.
K
Kaylee CochranAug 31, 2025
What to do if there is a paper jam in the ejection section of the Center-Folding Unit of Kyocera Printer Accessories?
- J
  Jenny KimSep 1, 2025
  If there is a paper jam in the ejection section of the Center-Folding Unit of your Kyocera Printer Accessories: * Grasp the front cover handle and open the front cover. * Turn the unit release lever (G6), and then hold the unit release handle (G7) and move the Center-Folding Unit in the paper ejection direction. * Hold the conveyor guide lever to open the conveyor guide and remove the jammed paper. * If the jammed paper cannot be easily removed, turn the conveyor guide knob to feed the paper further along for easy removal. * Remove the paper.
B
Brandi AdamsSep 4, 2025
How to fix curled copies from Kyocera Printer Accessories?
- T
  Terri StevensSep 4, 2025
  If the copies ejected from your Kyocera Printer Accessories are curled: * Pull out the pressure roller adjuster (G5) slightly and turn it so that its projection is set into one of the five small holes. * If ejected copies are curled downward when using a non-sorting mode, turn the pressure roller adjuster (G5) in the direction of a higher number. * If ejected copies are curled upward when using a non-sorting mode, turn the pressure roller adjuster (G5) in the direction of a lower number.
C
Cynthia MooneySep 8, 2025
How to fix unevenly stacked copies in Kyocera Printer Accessories?
- F
  frenchmichaelSep 8, 2025
  To address ejected copies that are not flat or are stacked unevenly when using Kyocera Printer Accessories, turn over the paper in the cassette and reload it.

Kyocera TASKalfa 620 Specifications

General

Category	All in One Printer
Functions	Print, Copy, Scan, Fax
Print Resolution	1200 x 1200 dpi
Max Resolution (B&W)	1200 x 1200 dpi
Copy Resolution	600 x 600 dpi
Scan Resolution	600 x 600 dpi
Fax Resolution	300 x 300 dpi
Monthly Duty Cycle	300, 000 pages
Duplex Printing	Yes
Processor Speed	1.2 GHz
Operating System Compatibility	Windows, Mac, Linux
Weight	176.4 lbs
Print Speed (Black)	62 ppm
Print Speed (Color)	62 pages per minute
Copy Speed (B&W)	62 ppm
Copy Speed (Color)	62 pages per minute
Standard Paper Capacity	600 sheets
Memory	2 GB
Connectivity	USB
Network Connectivity	Ethernet