What to do if there is a paper jam in the conveyor section to Tray A of Kyocera Printer Accessories?
If there is a paper jam in the conveyor section to Tray A of your Kyocera Printer Accessories: * Lift open Tray B. * If the jammed paper is visible in the eject slot, gently pull it out in the direction of ejection without tearing it.
What to do if there is a paper jam in the conveyor section to Tray B of Kyocera Printer Accessories?
If you have a paper jam in the conveyor section to Tray B of your Kyocera Printer Accessories: * If the jammed paper is visible in the eject slot, pull it out in the direction of ejection, without tearing it. * Open the upper cover and remove the jammed paper. * Close the upper cover.
What to do if a paper jam occurs in the Multi-Job Tray Unit of Kyocera Printer Accessories?
If a paper jam occurs in the Multi-Job Tray Unit of your Kyocera Printer Accessories, remove it without tearing it. Also, open the upper cover to the Document Finisher and remove the jammed paper.
What to do if there is a paper jam in the conveyor section to the internal tray of Kyocera Printer Accessories?
If there is a paper jam in the conveyor section to the internal tray of your Kyocera Printer Accessories: 1. If the jammed paper is visible in the eject slot, pull it out in the direction of ejection, without tearing it. 2. Grasp the front cover handle and open the front cover. 3. Turn internal tray lever G3 clockwise and pull out the internal tray. 4. Hold the internal tray release lever (G4) and open the internal tray. 5. Remove the jammed paper. 6. Hold the internal tray release lever (G4) and close the internal tray. 7. Push down on the frame to lock the internal tray in place. 8. Set the internal tray and turn the lever upright. Close the cover.
What to do if there is a paper jam in the conveyor section of the Center-Folding Unit of Kyocera Printer Accessories?
If there is a paper jam in the conveyor section of the Center-Folding Unit of your Kyocera Printer Accessories: * Grasp the front cover handle and open the front cover. * Turn the unit release lever (G6), and then hold the unit release handle (G7) and move the Center-Folding Unit in the paper ejection direction. * If the jammed paper is visible from under the internal tray, remove the jammed paper. * If paper is jammed inside the internal tray, remove the jammed paper using the conveyor guide.
What to do if there is a paper jam in the ejection section of the Center-Folding Unit of Kyocera Printer Accessories?
If there is a paper jam in the ejection section of the Center-Folding Unit of your Kyocera Printer Accessories: * Grasp the front cover handle and open the front cover. * Turn the unit release lever (G6), and then hold the unit release handle (G7) and move the Center-Folding Unit in the paper ejection direction. * Hold the conveyor guide lever to open the conveyor guide and remove the jammed paper. * If the jammed paper cannot be easily removed, turn the conveyor guide knob to feed the paper further along for easy removal. * Remove the paper.
How to fix curled copies from Kyocera Printer Accessories?
If the copies ejected from your Kyocera Printer Accessories are curled: * Pull out the pressure roller adjuster (G5) slightly and turn it so that its projection is set into one of the five small holes. * If ejected copies are curled downward when using a non-sorting mode, turn the pressure roller adjuster (G5) in the direction of a higher number. * If ejected copies are curled upward when using a non-sorting mode, turn the pressure roller adjuster (G5) in the direction of a lower number.
How to fix unevenly stacked copies in Kyocera Printer Accessories?
To address ejected copies that are not flat or are stacked unevenly when using Kyocera Printer Accessories, turn over the paper in the cassette and reload it.
General| Category | All in One Printer |
|---|---|
| Functions | Print, Copy, Scan, Fax |
| Print Resolution | 1200 x 1200 dpi |
| Max Resolution (B&W) | 1200 x 1200 dpi |
| Copy Resolution | 600 x 600 dpi |
| Scan Resolution | 600 x 600 dpi |
| Fax Resolution | 300 x 300 dpi |
| Monthly Duty Cycle | 300, 000 pages |
| Duplex Printing | Yes |
| Processor Speed | 1.2 GHz |
| Operating System Compatibility | Windows, Mac, Linux |
| Weight | 176.4 lbs |
| Print Speed (Black) | 62 ppm |
| Print Speed (Color) | 62 pages per minute |
| Copy Speed (B&W) | 62 ppm |
| Copy Speed (Color) | 62 pages per minute |
| Standard Paper Capacity | 600 sheets |
| Memory | 2 GB |
| Connectivity | USB |
| Network Connectivity | Ethernet |
To Next Page
