Kyocera TASKalfa 620 - Detaching and Refitting the Ozone Filters

2KN/2KP
1-5-87
(6) Detaching and refitting the ozone filters
Follow the procedure below to replace the ozone filters.
Procedure
1. Remove two screws and then remove the
rear duct A.
Remove three screws and then remove the
rear duct B.
Figure 1-5-181
2. Remove ozone filter 1 from the rear duct A.
Figure 1-5-182
3. Remove three ozone filter 2 from the rear
duct B.
4. Replace ozone filter 1 and 2, and then
attach the filters.
5. Refit the rear duct A and B.
Figure 1-5-183
Rear duct B
Rear duct A
Rear duct A
Ozone filter 1
Rear duct B
Ozone filter 2