Kyocera TASKalfa 620 - Document Processor (DP) Section; Detaching and Refitting DP

2KN/2KP
1-5-73
1-5-11 Document processor (DP) section
(1) Detaching and refitting DP
Procedure
1. Release two projections and remove the
connector cover.
Figure 1-5-151
2. Remove two screws and then remove the
connector inner cover.
3. Remove two connectors and ground screw.
Figure 1-5-152
Connector cover
Projection
Projection
Connector inner cover
Connector
Connector
Ground screw