Kyocera TASKalfa 620 - A Line Appears at the Leading or Trailing Edge; There Is a Regular Error between the Centers of the Original and Copy Image When the DP Is Used; There Is a Regular Error between the Leading Edges of the Original and Copy Image When the DP Is Used

2KN/2KP
1-4-58
(20) There is a regular error between the centers of the original and copy image when the DP is used.
(21) There is a regular error between the leading edges of the original and copy image when the DP is used.
(22) A line appears at the leading or trailing edge.
(23) A line appears at the leading or trailing edge.
Copy example Causes Check procedures/corrective measures
Misadjusted center line. Readjust the DP center line (see page 1-3-31).
Copy example Causes Check procedures/corrective measures
Misadjusted original scanning start
position.
Readjust the DP leading timing (see page 1-3-30).
Copy example Causes Check procedures/corrective measures
Misadjusted of the speeds of
the motors.
Change the setting for TC Setting (Uneven Image) of main-
tenance item U053 (see page 1-3-20).
Copy example Causes Check procedures/corrective measures
Misadjusted of the speeds of
the motors.
Change the setting for TC Setting (Uneven Image) of main-
tenance item U053 (see page 1-3-20).
70 mm
64 mm
64 mm
64 mm