2KN/2KP
1-5-83
1-5-12 Others
(1) Detaching and refitting the waste toner box
Follow the procedure below to replace the waste toner box.
Procedure
1. Remove two screws and then remove the
lower right rear cover.
Figure 1-5-172
2. Pull out the waste toner box.
3. Replace the waste toner box and attach the
tank.
4. Refit the right rear cover.
5. Run maintenance item U921 (Checking/
clearing the waste toner box count) to clear
the count (see page 1-3-91).
Figure 1-5-173
Lower right
rear cover
Screws
Waste toner box
To Next Page
Loading...
