Kyocera TASKalfa 620 - Image Formation Problems; No Image Appears (Entirely White)

2KN/2KP
1-4-50
1-4-3 Image formation problems
(1) No image
appears
(entirely white).
(2) No image
appears
(entirely black).
(3) Image is too
light.
(4) Background is
visible.
(5) A white line
appears longitu-
dinally.
See page 1-4-50 See page 1-4-51 See page 1-4-52 See page 1-4-52 See page 1-4-52
(6) A black line
appears longitu-
dinally.
(7) A black line
appears later-
ally.
(8) One side of the
copy image is
darker than the
other.
(9) Black dots
appear on the
image.
(10)Image is
blurred.
See page 1-4-53 See page 1-4-53 See page 1-4-53 See page 1-4-54 See page 1-4-54
(11) The leading
edge of the
image is consis-
tently mis-
aligned with the
original.
(12)The leading
edge of the
image is spo-
radically mis-
aligned with the
original.
(13)Paper creases. (14)Offset occurs. (15)Image is partly
missing.
See page 1-4-54 See page 1-4-54 See page 1-4-55 See page 1-4-55 See page 1-4-55
(16)Fusing is poor. (17)Image is out of
focus.
(18)Image center
does not align
with the original
center.
(19)Image is not
square.
(20)There is a regu-
lar error
between the
centers of the
original and
copy image
when the DP is
used.
See page 1-4-56 See page 1-4-56 See page 1-4-56 See page 1-4-56 See page 1-4-57