2
#DANGER
●Never make measurements under the circumstances
exceeding the designed measurement category and the
ratedvoltageoftheinstrumentandthetestleads.
●Donotattempttomakemeasurementsinthe presence of
flammable gasses. Otherwise, the use of the instrument
maycausesparking,whichcanleadtoanexplosion.
●Never attempt to use the instrument if its surface or your
handiswet.
●Becarefulnottoshort-circuitthepowerlinewiththemetal
part of the test leads when measuring a voltage. It may
causepersonalinjury.
●Do not exceed the maximum allowable input of any
measuringranges.
●DonotpresstheTestbuttonwithtestleadsconnectedto
theinstrument.
●Never open the Battery compartment cover during a
measurement.
●To prevent possible electrical shock, do not touch the
circuit under test during an insulation resistance
measurementorrightafterameasurement.
●The instrument should be used only in its intended
applications or conditions. Otherwise, safety functions
equipped with the instrument do not work, and instrument
damageorseriouspersonalinjurymaybecaused.
●Keep your fingers and hands behind the protective
fingerguardduringmeasurement.
#WARNING
●Neverattempttomakeanymeasurementsifanyabnormal
conditions such as broken case and exposed metal parts
arenoted.
●Do not rotate the Range switch with the test leads
connectedtotheequipmentundertest.
●Do not install substitute parts or make any modifications
to the instrument. Return the instrument to your local
KYORITSUdistributorforrepairorre-calibration.
●Do not try to replace the batteries if the surface of the
instrumentiswet.
●
Inserttheplugintotheterminalfirmlywhenusingtestleads.
www.calcert.com sales@calcert.com1.888.610.7664
0
5
10
15
20
25
30