1
1.Safety warnings
○Thisinstrumenthas been designed,manufactured and tested
accordingtoIEC61010:SafetyrequirementsforElectronic
Measuringapparatus,anddeliveredinthebestconditionafter
passingqualitycontroltests.Thisinstructionmanualcontains
warningsandsafetyruleswhichmustbeobservedbytheuser
to ensure safe operation of the instrument and to maintain
it in safe condition. Therefore, read through these operating
instructionsbeforeusingtheinstrument.
#WARNING
●Readthroughandunderstandinstructionscontainedinthis
manualbeforestartingtousetheinstrument.
●Keep the manual at hand to enable quick reference
whenevernecessary.
●The instrument is to be used only in its intended
applications.
Understandandfollowallthesafetyinstructionscontained
inthemanual.
Failure to follow the instructions may cause injury,
instrument damage and/or damage to equipment under
test. Kyoritsu is by no means liable for any damage
resulting from the instrument in contradiction to this
cautionarynote.
○The symbol # indicated on the instrument means that
the user must refer to the related parts in the manual for
safe operation of the instrument. It is essential to read the
instructionswhereverthesymbol#appearsinthemanual.
#DANGERisreservedforconditionsandactions that are
likelytocauseseriousorfatalinjury.
#WARNINGis reserved for conditions and actions that
cancauseseriousorfatalinjury.
#CAUTIONisreservedforconditionsandactionsthatcan
causeinjuryorinstrumentdamage.
www.calcert.com sales@calcert.com1.888.610.7664
0
5
10
15
20
25
30