KYORITSU KEW3125A - Battery Replacement Procedure; Safely Replacing Instrument Batteries


25

7．Battery replacement
#DANGER
●DonotopentheBatterycompartmentcoverifthesurface
oftheinstrumentiswet.
●Never open the Battery compartment cover during a
measurement.
●Toavoidpossibleelectricshock,disconnectthetestleads
and PowerAdaptor from the instrumentbeforereplacing
batteries.Afterreplacingbatteries,makesuretotightenup
thescrewfortheBatterycompartmentcover.
#CAUTION
●Donotmixnewandoldbatteries.
●Makesuretoinstallbatteriesincorrectpolarityasmarked
inside.
(1)Set the Range switch to OFF position, and disconnect
thetestleadsfromtheinstrument.
(2)Loosen the Battery compartment cover-fixing screws, and
remove the Battery compartment cover. Remove all eight
batteriesandreplacethemwithnewones.
(3)Afterreplacingbatteries,besuretotightenupthescrewfor
theBatterycompartmentcover.
Make sure to install
batteries in correct
polarity as marked
inside.
SCREW
www.calcert.com sales@calcert.com1.888.610.7664
0
5
10
15
20
25
30