Rigging system description
K3-BAR
K3-BAR is an extension bar designed to be combined with K3-BUMP.
By adding a K3-BAR to the K3-BUMP, the site angle range can be increased. Seventeen holes are available on the K3-
BAR which can be attached to the K3-BUMP as a rear or a front extension and in position A or B, thus offering a total of
68 discrete positions for pick-up points.
The rear extension is suited to downwards site angles. The front extension is suited to upwards site angles.
24 K3 owner's manual (EN) version 1.0
To Next Page
Loading...
Need help?
General
