Inspection and preventive maintenance
Shackles
Moving parts
Drive the shackle axis in its lodging. Make sure that the end is ush with the shackle.
Related tasks
Rigging part inspection (p.42)
Runners and corner stops
• Runners are not worn out.
• Screws are tightened.
Reference pictures
KS28 ground runner and corner stops KS28 corner stop
KS28-OUTRIG runner
Contact your L-Acoustics representative for repair instructions.
Related tasks
Rigging part inspection (p.42)
52 K3 owner's manual (EN) version 1.0
To Next Page
Loading...
Need help?
General
