L-Acoustics K Series User Manual

Rigging procedures
b) Secure the front KARADOWNK3 tabs to the K3 rigging.
Slightly lower the K3 array if necessary.
c) Reconnect the top Kara II at the rear to the assembly.
6. Raise the array.
Do not implement a pullback on a K3 array with a Kara II downll.
7. Set the inter-enclosure angles.
Refer to the Kara II owner's manual.
K3 owner's manual (EN) version 1.0 79

L-Acoustics K Series Specifications

General

Brand	L-Acoustics
Model	K Series
Category	Speakers
Language	English